Troubleshoot missing or stale asset data - OnSight Knowledgebase

Troubleshoot missing or stale asset data

Back to Troubleshooting & support Browse product

Use this guide when an asset is not appearing where expected, has stopped showing current readings, or is shown as Stale.

What the status means

Command bases an asset's activity status on the most recent data received from its linked hardware:

  • Live means Command is receiving real-time data.
  • Warm means data was received recently.
  • Stale means Command has not received data for quite a while.

The exact timing is set for your company, so first compare the timestamp shown on the asset with the reporting behaviour you expect from that device.

Work through these checks

  1. Confirm the company and asset. Make sure you are in the correct company, then search for and open the asset by name, group or tag.

  2. Confirm the hardware assignment. On the asset, check that the expected beacon, RFID tag, logger or other device is linked. If it was recently installed, verify its printed identifier or scan its QR code. See Assign hardware to an asset.

  3. Check the last update and history. Review the last sensor update, current readings and presence or GPS history. This tells you whether Command has received anything recently and where the asset was last detected.

  4. Check the physical device. Confirm the device is installed on the correct physical asset, has power or a usable battery where applicable, and is being used in the way its technology expects. For example, Bluetooth beacons normally report in real time when in gateway range; RFID data is recorded when scanned; loggers may upload their stored data when read at the destination.

  5. Check where the asset should be seen. For gateway-based tracking, confirm that the asset is within range of the relevant gateway and that the gateway is assigned to the correct zone. Fixed gateways can also provide the location inherited by assets they see. See Configure gateways in a zone.

  6. Check the gateway. Open the relevant zone and gateway. If offline alerting is enabled, investigate any offline notification. Also check its reporting interval: it limits how often the gateway reports sensors in its proximity, so it affects how quickly new data appears.

  7. Compare the right view for the question. Use Status for current sensor activity, Map for current or historic location, and Reports for an exportable audit over a selected period. See Understand asset activity status and Use the live map.

Escalate with useful details

If the issue remains, contact your reseller if you have one. Otherwise, contact OnSight directly.

Include the asset name, hardware identifier, the time window affected, its last update time, the expected zone or location, and screenshots where possible. This lets the support team trace the device, gateway and incoming data quickly.

More in this category

Related guides for this topic.

Need a hand?

Tell us which product you use, what you’re trying to do, and what happened.

Contact support