Use this checklist for the OnSight Mobile app, a portable RFID scanner or an MG5. Follow your company's rules for when scanning should run.
Version notes
The app steps below cover 1.1.3 build 27 and later. Android background scanning and its summary start at 1.1.4 build 40. Diagnostic export starts at 1.1.4 build 42. NFC links request GPS from 1.1.4 build 44.
These instructions are prepared for 1.1.4 build 51, the next planned release. It includes the earlier trial features and the iPhone background trial. Check your installed build before using the controls.
Before leaving
- Confirm the task, target assets and company.
- Charge the phone or scanner. Take power for a long session.
- Sign in and connect the company that should receive your readings.
- Check that your account is assigned to the intended mobile-gateway zone.
- Turn Bluetooth on and grant the app's permissions.
- Turn GPS on if scan locations matter. On iPhone, check While Using the App permission and enable Precise Location where possible.
- Confirm the expected hardware is linked to the correct assets.
- Run a short scan with a known device and check its latest reading in Command.
For an Android background trial, enable Settings > Experimental > Background scanning, tap Save, then start a new scan with the app open. Check for the OnSight scanning notification.
During the session
Keep within practical Bluetooth range. Use search and filters to find the devices you need.
On iPhone, keep the app in the foreground unless you are testing the separate iOS 26 Live Activity trial. Android can continue in the background only when the experimental setting is enabled. The phone may still reduce detection frequency.
If the internet fails, Bluetooth scanning can continue locally. The app retries the cloud connection and resumes sending recent readings when it recovers. It does not retain a complete offline history.
If support has requested diagnostics, start logging before repeating the problem. Stop and export soon afterwards.
Finish the session
- Tap Stop scanning. In an opted-in background session, this also stops GPS and the Android service or iPhone Live Activity.
- Turn GPS off if it remains on and is no longer needed.
- Review the background summary, available on Android and from build 51 on iPhone. Upload counts describe submissions; check Command for receipt.
- Open the relevant assets in Command and check their latest readings and history.
- Record missing devices, unexpected locations and the time of any problem.
- Stop diagnostic logging and share the ZIP only if support needs it.
- Charge and store the equipment.
See Scan Bluetooth assets, GPS tracking and Android diagnostics.
iPhone background scanning
The next planned release, 1.1.4 build 51, includes the iPhone trial first tested in build 45. It requires iOS 26 or later and Live Activities to be allowed.
Enable Settings > Experimental > Background scanning, tap Save, then start a new scan with OnSight open. The setting starts off. GPS is optional.
Supported Bluetooth readings stopped in our locked, screen-off tests. GPS stayed fresh in a short test, but fresh GPS does not create new sensor readings. Keep OnSight open when continuous readings matter. Stop scanning ends Bluetooth, GPS and the Live Activity.
See Try background scanning on iPhone for setup and limits.